Note: ALWAYS DILUTE WITH WATER BEFORE USE. Always add Ever Bright to water. Never add water to undiluted Ever Bright. If deionized water is not available, ensure the water used contains less than 50 ppm chlorides. Manual Use: Don appropriate Personal Protection Equipment as outlined in the Safety Data Sheet (SDS) before mixing product with deionized water. Add 1-2 quarts Ever Bright per 8 gallons of deionized or reverse osmosis water. Soak instruments for approximately 0 minutes. With a towel, spot scrub troublesome areas as needed. Discard solution daily. Machine Use: Pre-clean instruments according to normal standard operating procedures. Add 1-2 quarts of Ever Bright for every 8 gallons of water in descaling or brightening cycles. Use deionized or reverse osmosis water for 30 minutes at 160OF (71OC), followed by two rinse phases. Consult the machine manufacturer’s directions for use of the specific machine being used.

Store below 120OF (49OC) Use up to 35 months from date of manufacture.